Achilles | AIRE & Tributary | Hyside | NRS | AIRE Kayaks | Catarafts | Outcast & Fish Cat
M Fk Snoqualmie | Tieton | Upper Skagit | Wenatchee | Yakima
Check out some of our more popular packages:
Or design your own package and contact us for a quote.
Hyside rafts are made in South Korea. These top quality rafts are constructed of blue Dupont Hypalon® rubber coated fabrics.
All the Hyside rafts come with a glued-in air mattress-type self-bailing (S/B) floors with Leafield pressure relief valves (except for the Livery Series which have non-self-bailing floors).
They all have spring loaded Leafield valves, stainless steel D-rings, and carry handles.
Each raft has frame wear patches on the top of the tubes (except on the Livery Series) and painted 12" wide urethane chafers on the bottom of the tubes (except on the Livery Series which have gum rubber chafers).
A repair kit is included with each raft.
All the rafts in this series have standard (non-self-bailing) floors. Their floor and tube material is a 1680 denier Hypalon® coated fabric.
The two-chambered hulls have two attached thwarts, four carry handles, and two stainless steel D-rings. Four frame D-rings and four perimeter line D-rings can be added later. There are black gum chafers on the bottom of the Livery tubes.
Livery rafts are in very limited supply.
Each Livery Series boat comes with a repair kit and a five year warranty on materials and on workmanship.
The floor and tube material in the Outfitter Series boats is a 1680 denier Hypalon® coated fabric.
Three of the four models have four-chambered hulls with two removable thwarts (using the hinge and pin system). The 9 foot model has two hull chambers and one removable thwart. Each boat has seven stainless steel D-rings and four carry handles (the 9-footer has just two).
The Outfitter Series boats come with a repair kit and a five year warranty on materials and workmanship.
The floor and tube material in the Outfitter Pro Series is a 1680 denier Hypalon® coated fabric.
All the models have four-chambered hulls with two removable thwarts (using the hinge and pin system). Each boat has 7 stainless steel D-rings (16 on the 15 footer), Leafield valves, and six carry handles.
Each Outfitter Pro Series boat comes with a repair kit and a five year warranty on materials and workmanship.
| Model | Length | Width | Tube | Weight | Price |
| Livery Series | |||||
| (2300) 122 LU | 10' 0" | 5' 0" | 16" | 60 | $1,655 |
| (2301) 136 LU | 11' 4" | 5' 6" | 16" | 72 | $2,000 |
| (2303) 158 LU | 13' 0" | 5' 10" | 18" | 87 | $2,555 |
| (2304) 163 LU | 13' 10" | 6' 6" | 19½" | 102 | $2,955 |
| Outfitter Series | |||||
| (2310) 108 SBU | 9' 0" | 5' 0" | 18" | 45 | $1,990 |
| (2311) 140 SBU | 11' 8" | 5' 10" | 18" | 87 | $3,105 |
| (2312) 158 SBU | 13' 0" | 6' 0" | 18" | 99 | $3,290 |
| (2313) 163 SBU | 13' 10" | 6' 6" | 19" | 115 | $3,820 |
| Outfitter Pro Series | |||||
| (2321) 156 ASBU | 12' 11" | 6' 2" | 19" | 100 | $4,025 |
| (2322) 164 ASBU | 13' 9" | 6' 4" | 20" | 109 | $4,380 |
| (2323) 166 ASBU | 14' 3" | 6' 10" | 21" | 118 | $4,620 |
| (2324) 180 ASBU | 15' 0" | 7' 0" | 21" | 119 | $4,980 |
| (2325) 196 ASBU | 15' 10" | 7' 8" | 22" | 138 | $5,425 |
| (2326) 217 ASBU | 18' 0" | 8' 6" | 24" | 154 | $5,880 |
Prices subject to change without notice.
| Model | Material Weight | Handles | D-Rings | Chambers |
| Livery Series | 1680 | 4 | 2* | 2h/2t |
| Outfitter Series | 1680 | 2**/6 | 7 | 2h*/4h/2t/1f |
| Outfitter Pro Series | 2520 | 6 | 7 | 4h/2t/1f |
*4 additional frame
d-rings for $160; **108SBU |
||||